Incinerator Maximizing Combustion Efficiency

More smoke and other pollutants are released into the air during the ‘start-up’ and ‘cool down’ phases of the burn cycle than during the ‘full burn phase’ when high temperatures are maintained.    Low temperature smoldering fires should be avoided. Burn only dry feedstock and periodically add additional waste to the fire in order to maintain…

Hypocritical Smoke: The Scandal of Medical Waste Incineration

The middle-class Foxboro subdivision in North Salt Lake City, Utah, is, in many ways, an idyllic community for young families – new, modest, similarly sized homes on fairly compact lots, close by neighbors connected by sidewalks and streetlights, tons of playmates for all the kids. And Mormon communities have lots of kids, munchkins if you…

Double Combustion Chamber Containerized Mobile Incinerator

Waste Incinerator Mounted in ISO 20′ or 40′ Container before leave Factory. Regular Waste Burning Rate from 10kgs to 150kgs per hour. Double Combustion Chamber The incinerator design with primary combustion chamber, secondary combustion chamber(post combustion) and dry scrubber optional. This design will reduce black smoke, burn completely and Environmentally Friendly. Free Installation The incinerator…

hospital for burning hazardous waste and chimicals

use in the hospital for burning hazardous waste and chimicals, minimum Capacity 300 per hour. I will be reselling to my client?. Below is the information I was given and nothing else. The hospital incinerator for use in the clinical waste as required by international environmental management. Minimum 300 Kg capacity/hr, Fuel fired, refractory lined,…

Medical Waste treatment unit

Medical Waste treatment unit The medical waste treatment unit shall be environmentally-friendly, and have a capacity of about 200-300kg per batch , to enable treatment of medical waste generated in a 160-bed hospital The equipment should be self-steam generating if steam is needed for the sterilization process. The medical waste treatment unit shall be capable…

Solid Waste Incinerators

The Contractor shall provide a Cremation System package for  TWO (02) Cremators and system approved by related authority, which must fit into the allocated area as shown on the plan drawings. The work shall include but not limited to design preparation, authority design approval, supply, fabricate, construct, commissioning, testing, operational approval, provide training and also…